采煤工作面煤层注水工艺优化与应用

针对目前煤层注水存在的施工钻孔效率低、钻孔深度达不到要求、注水钻孔封孔不严、封孔器回收困难等问题，研究注水工艺的改进优化，对钻机、钻具及封孔器进行重新设计选型，形成了一整套的注水装备。该装备的应用提高了施工效率，为降低工作面粉尘危害、抑制工作面瓦斯涌出、防治煤炭自然发火等危害探索出了更加高效的途径和方法。现场应用表明，煤层注水有效地改善了工作面作业环境，为工作面实现高产高效奠定了基础。     

Effect of clad ratio on interfacial microstructure and properties of cladding billets via direct-chill casting process

Numerical simulation and experiments were introduced to develop AA4045/AA3003 cladding billets with different clad-ratios. The temperature fields, microstructures and mechanical properties near interface were investigated in detail. The results show that cladding billets with different clad-ratios were fabricated successfully. Si and Mn elements diffused across the bonding interface and formed diffusion layer. With the increase of clad-layer thickness, the interfacial region transforms from semisolid–solid state to liquid–solid state and the diffusion layer increased from 10 to 25 μm. The hardness at interface is higher than that of AA3003 side but lower than that of the other side. The bonding strength increased with the clad-layer thickness, attributing to solution strengthening due to elements diffusion. The cladding billets were extruded into clad pipe by indirect extrusion process after homogenization. The clad pipe remained the interfacial characteristics of as-cast cladding billet and the heredity of clad-ratio during deformation was testified.     

Microstructural characteristics of as-forged and β-air-cooled Zr–2.5Nb alloy

Multiple characterization and analysis techniques including electron backscatter diffraction (EBSD), electron channeling contrast (ECC) imaging, transmission electron microscopy (TEM) and microhardness test were jointly employed to investigate microstructural characteristics such as local composition, morphology, grain boundary characteristics and interphase orientation relationship of a forged Zr–2.5Nb alloy before and after β-air-cooling. Results show that the as-forged specimen is composed of equiaxed and lamellar α grains and continuous net-like β-Zr films. After the β-air-cooling, the microstructure of the specimen is featured by basket-weave Widmanstätten structure, in which the inter-α-plate second phases are nanoscale β-Zr. Analyses for crystallographic orientations reveal that the Burgers relationship has been strictly followed during the β→α cooling. Compared to the as-forged specimen, the hardness of the β-air-cooled specimen is higher, which could be attributed to the decreased structural sizes of both α and β phases, and the increased fraction of high angle boundaries as well.     

An Artificial Skyrmion Platform with Robust Tunability in Synthetic Antiferromagnetic Multilayers

Magnetic skyrmions are topologically nontrivial spin structures, and their existence in ferromagnetically coupled multilayers has been widely reported with a disordered arrangement. Here, a nucleation scenario of ordered skyrmions in nanostructured synthetic antiferromagnetic (SAF) multilayers is proposed and experimentally demonstrated using direct magnetization imaging, indirect magnetometer and magnetoresistance measurement, and micromagnetic simulation. Instead of relying on Dzyaloshinskii–Moriya interaction, the antiferromagnetic interlayer exchange coupling in the SAF multilayers fulfills the role of nucleation and stabilization of skyrmions. The robustness of the proposed skyrmion nucleation scenario is examined against temperature from 4.5 to 300 K and device size from 400 to 1200 nm. Interestingly, these synthetic skyrmions still behave well with a size less than 100 nm. The higher stability than generic magnetic domains can be attributed to topological protection. The results thus provide an artificial skyrmion platform to meet the functional needs of high density and designable arrangement in magnonic and spintronic applications.     

植物细胞分裂素ortho-Topolin Riboside对人白血病细胞株THP-1的抗癌活性及机制初探

本研究以人急性髓性白血病细胞株THP-1为研究对象,初步探讨其抗癌活性及作用机制。通过光学显微镜观察N6-2-苄胺羟基腺苷(oTR)作用后THP-1细胞形态学和数目变化;CCK-8法检测oTR对THP-1细胞的增殖抑制作用,并用核苷转运体拮抗剂和腺苷受体拮抗剂预处理细胞检测oTR进入细胞的方式;用流式细胞仪分析oTR作用对THP-1细胞凋亡和分化的影响。结果表明,oTR可显著(P<0.05)抑制THP-1细胞的增殖能力,且呈浓度依赖性;核苷转运体拮抗剂Dipyridamole预处理THP-1细胞后,可明显逆转oTR的增殖抑制作用,而4种腺苷受体拮抗剂(DPCPX、SCH58261、MRS1754和MRA1191)则无显著影响;oTR可诱导处理组细胞亚倍体峰比例显著(P<0.05)高于对照组,且细胞髓系分化标志蛋白CD11b表达明显升高。以上结果表明细胞分裂素oTR通过核苷转运体途径进入THP-1细胞,显著(P<0.05)抑制细胞的增殖,并可诱导THP-1细胞发生凋亡和髓系分化。     

Complementary doping of van der Waals materials through controlled intercalation for monolithically integrated electronics

Nano Research - Doping control has been a key challenge for electronic applications of van der Waals materials. Here, we demonstrate complementary doping of black phosphorus using controlled ionic...     

Single nanowire assembled by liquid dielectrophoresis for on-chip technologies

ABSTRACT

Study on dynamic tensile properties and atomic chain fabrication of single nanowire, for understanding its dynamic tensile properties and unique physical properties of atomic chain to fabricate atom scale devices, is one of frontier research issues in nano-scale science. However, how to assemble single nanowire on a tensible micro-structure becomes one of the most difficult problems, which severely restricts the development of this research field. In this paper, after the ultrahigh tensible microelectrode chip is fabricated by micro-electromechanical systems technology, hexamethyldisilazane is utilized to improve hydrophobicity of the chip, and then a micro-droplet dielectrophoresis experimental platform and technology is developed to assemble single nanowire on the sensible microelectrode. Experimental results show that accurate and efficient assembly of single Cu nanowire is realized, which contributes greatly to the further research of dynamic tensile properties and atomic chain fabrication. And for guiding the assembly experiments, finite element technology is also utilized to analyze the local micro electro-field around the microelctrodes during dieletrophoresis experiments.     

PVC地板行业研究现状及发展趋势

概述了国内外PVC地板行业的生产及应用现状,比较了几种地板材料的优缺点,介绍了PVC地板生产技术的研究进展情况,分析了国内PVC地板行业的发展趋势。     

铝合金三角形波纹夹芯板对平头弹抗冲击特性数值模拟研究

为研究铝合金三角形波纹夹芯板对平头弹体的抗冲击性能及损伤特性，利用有限元软件ABAQUS/Explicit建立弹体冲击靶板的数值模拟模型，并结合实验验证了模型及其参数的有效性。基于数值计算结果，分析了三角形波纹夹芯板几何结构对其防护性能、失效模式和能量吸收的影响规律及机理，并与等面密度单层板进行对比分析，研究结果表明，靶体几何结构对其抗冲击性能存在影响，三角形波纹夹芯板抗冲击性能低于单层板抗冲击性能。此外，增加芯体拓扑结构夹角能显著提高三角形波纹夹芯板的抗冲击性能，并且靶板几何形状会对其失效模式及耗能特性存在影响。     

Chemical process fault diagnosis based on enchanted machine‐learning approach

In the chemical industry, fault diagnosis is a challenging task due to the complexity of chemical equipment. This paper proposes a machine learning‐based approach to achieve the goal of fault diagnosis. First, in order to reduce the impact of redundant features, support vector machine recursive feature elimination (SVMRFE) is used to select important features. The trained probabilistic neural network (PNN) is then used for fault diagnosis. Considering that the diagnostic performance is affected by its hidden layer element smoothing factor (σ), the modified bat algorithm (MBA) is used to optimize the PNN to obtain optimal global parameter values. The MBA adopts a better optimization mechanism than the basic algorithm and achieves excellent global convergence. It can globally optimize the smoothing factor, which effectively improves the fault diagnosis ability of the PNN. During the testing of the Tennessee Eastman (TE) process data set, we evaluate the performance of the proposed model by comparing the F₁‐score and accuracy of the different methods. The charts provided describe the fault diagnostic results and classification for the different models. The results indicate that the MBA has a better optimization ability than other traditional optimization algorithms. At the same time, the combination method proposed in this paper is also superior to others and can significantly improve the accuracy of TE process fault diagnosis.